Ara
Toplam kayıt 8, listelenen: 1-8
Mechanical Properties and Corrosion Resistance of Borosintered Distaloy Steels
(Springer, 2020)
Distaloy SA is a sponge iron powder (nominal composition: Fe-1.75Ni-1.5Cu-0.5Mo) widely used in the production of powder metallurgy (P/M) parts in the automotive industry. In this study, Distaloy SA powders were sintered ...
Effect of Cr Addition on Properties and Tribological Behavior at Elevated Temperature of Boride Layers Grown on Borosintered Powder Metallurgy Alloys
(Korean Institute of Metals and Materials, 2022)
This study focused on chromium addition (0 wt%, 3 wt%, 6 wt%, 9 wt% and 12 wt%) on the boride layer formation, microhardness, fracture toughness and elevated temperature friction and wear behaviour of alloys formed by ...
Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings
(Elsevier, 2022)
Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI 316 L stainless steel, were pack-borided at 1000 °C for 4 h in open air, high-purity Ar and vacuum environments. The HEA, which had ...
Microstructural characterization, boriding kinetics and tribo-wear behavior of borided Fe-based A286 superalloy
(Elsevier, 2022)
Iron-based superalloys are alloys produced for use in corrosive environments as an alternative to high-cost nickel-based superalloys. However, their average strength and hardness, attributed to their austenitic structures, ...
Microstructural and Tribological Behavior of Pack-Borided Ni-Based Hastelloy C-276 Superalloy
(Springer, 2022)
Although the toughness and corrosion resistance of Ni-based superalloys are high due to their face-centered-cubic structure, their surface hardness and, thus, wear resistance are not satisfactory. The boriding process is ...
A new approach to improve some properties of wire arc additively manufactured stainless steel components: Simultaneous homogenization and boriding
(Elsevier, 2023)
Arc-directed energy deposition (Arc-DED), also commonly referred to as wire arc additive manufacturing (WAAM), is a cost-effective 3D metal additive manufacturing process in which large metallic parts can be produced due ...
Effect of boriding on high temperature tribological behavior of CoCrMo alloy
(Elsevier, 2023)
In the present work, CoCrMo alloy surfaces were subjected to powder-pack boriding at 950 & DEG;C for 5-hour and 7 -hour treatment periods. The obtained boride layers were characterized with scanning electron microscopy, ...
Sliding Wear and Friction Performance of Pack-Borided Co–28Cr–6Mo Alloy in Physiological Lubricants
(Springer, 2023)
The role of bovine calf serum (BCS) related to the functional performance of synovial fluid on the tribological behavior of borides grown on cobalt-28chromium-6molybdenum (Co-28Cr-6Mo) alloy used in orthopedic prostheses ...