Search
Now showing items 1-10 of 77
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...
Marine Algae-PLA composites as de novo alternative to porcine derived collagen membranes
(Elsevier, 2020)
Resorbable and volume-stable collagen matrices have been preferred as grafting materials for diverse clinical applications in recent years. On the other hand, there is always an existing risk of transmission of infection ...
Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
(Institute of Physics Publishing, 2019)
Although friction stir welding (FSW) has widely been applied to aluminum alloys in several industries over the past three decades, it is not yet used in industry for joining of steels. The aim of this study is to characterize ...
Production of Multi-Walled Carbon Nanotube and Graphene Doped Thermoplastic Polyurethane Fiber and Investigation of Mechanical Properties
(IOP Publishing, 2020)
Nowadays nanofibers are used in many areas. Nanofibers produced by electrospinning are required to be porous, large surface area, lightweight and cost effective. In addition to being lightweight, nanofibers must also have ...
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
(Elsevier, 2016)
Ground granulated blast furnace slag (GGBFS) is a byproduct from the blast-furnaces of iron and it is a very beneficial in the mortar and concrete production. The present paper reviews the literature related to the utilization ...
Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
(Korean Institute of Metals and Materials, 2019)
Abstract: In this study, the surface of AISI H13 steel was borided with powder blends of B4C and NaBF4 using the powder-pack method at 800, 900 and 1000 °C for 2, 4 and 6 h. The structural and mechanical characteristics ...
Performance optimization of hybrid fiber concrete according to mechanical properties
(Elsevier, 2020)
In this research, interactional effects of four different fiber types, (steel, glass, synthetic and polypropylene) fly ash replacement ratio with cement, electrical arc furnace slag replacement ratio with natural aggregate ...
Tunable perfect metamaterial absorber and sensor applications
(Springer, 2016)
Operation frequencies of traditional metamaterial absorbers are fixed meaning that it is not possible to change that frequency after the fabrication. Therefore, more studies are focused on the design of Tunable metamaterial ...
A Comparative Study on the Effects of Different Thermochemical Coating Techniques on Corrosion Resistance of STKM-13A Steel
(Springer, 2018)
The corrosion resistances of three different thermochemical coatings (grown using titanizing, boriding, and borotitanizing treatments) applied to STKM-13A steel surfaces were investigated. The coatings were characterized ...
Improving the aging resistance of bitumen by addition of polymer based diethylene glycol
(Elsevier, 2018)
This study deals with improving the short-term aging resistance of bitumen with a new material, a diethylene glycol based polyboron compound (DEGPB). The compound was synthesized chemically and used 50/70 penetration grade ...
