Ara
Toplam kayıt 7, listelenen: 1-7
The prediction of surface roughness and tool vibration by using metaheuristic-based ANFIS during dry turning of Al alloy (AA6013)
(Springer, 2022)
In this article, the adaptive neuro-based fuzzy inference system (ANFIS) model is developed to estimate the surface roughness (Ra) and tool vibrations (Acc) of AA6013 aluminum alloy during dry turning. Turning experiments ...
A comparison of four machine learning techniques and continuous wavelet transform approach for detection and classification of tool breakage during milling process
(Canadian Science Publishing, 2022)
In machining, the tool condition has to be monitored by condition monitoring techniques to prevent damage by the use of tools and the workpiece. Cutting forces acting on the tool between zero and maximum values cause the ...
Characterizations of Microstructure and Properties of Dissimilar AISI 316L/9Ni Low-Alloy Cryogenic Steel Joints Fabricated by Gas Tungsten Arc Welding
(Springer, 2022)
The demand for dissimilar joining of steel grades, namely austenitic stainless steels to low-alloy steels, may increase in near future owing to the fact that the storing of LNG is currently becoming a necessity, particularly ...
Multi-pass butt welding of thick AISI 316L plates by gas tungsten arc welding: Microstructural and mechanical characterization
(Elsevier, 2022)
Austenitic stainless steels exhibit excellent properties such as outstanding formability even at cryogenic temperatures, high mechanical properties and good corrosion performance. This makes them attractive for use in ...
A study on microstructural and mechanical properties of gas tungsten arc welded thick cryogenic 9% Ni alloy steel butt joint
(Elsevier, 2022)
Low alloy steel plates containing 9% Ni are generally preferred in the production of LNG storage tanks, due to their outstanding combination of properties such as excellent toughness, high ductility and crack re-sistance ...
Passive Flow Control of Ahmed Body using Control Rod
(Universiti Malaysia Pahang, 2022)
In the current study, numerical analysis of passive control flow with a control rod for Ahmed body is performed at different slant angles and velocities and placed rod locations on the slant surface. The aim of the study ...
Investigation of the Effect of Side Devices and Crosswind Flow on Aerodynamic Drag of a Ground Vehicle
(Çukurova Üniversitesi, 2022)
In the present study, effect of side devices and crosswind flow are investigated to observe aerodynamic drag coefficient for a simplified ground vehicle (Ahmed body) since it directly effects fuel consumption. When the ...