Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 29, listelenen: 13-29
-
Katı Yakıtlı Roket ALP-01 Tasarımı, Modellemesi ve Simülasyonu
(Avrupa Bilim ve Teknoloji Dergisi, 2019)Bu çalışmada katı yakıtlı alçak irtifa roketi ALP-01’in CAD tasarımı yapılmıştır. 1500 metre irtifa için roket boyutları; seçilen motor için optimize edilmiştir. Burun konisi geometrisi olarak Parabolik tip tercih edilmiş ... -
MALE UAV selection in interval Type-2 fuzzy sets environment
(IOS Press BV, 2022)Unmanned Aerial Vehicles (UAVs) are increasingly used in the military field. Especially in recent years, UAVs have been a very effective instrument in gaining airspace superiority and military success. Many countries compete ... -
The mechanical effect of functionalization in laminated composite material
(Emerald Publishing, 2023)PurposeThis study aims to systematically compare the effect of increasing fiber-matrix interface adhesion and matrix toughness in layered composite materials. Design/methodology/approachSilane ((3-glycidyloxypropyl) ... -
The modified residual property model for fracture mechanics
(Kauno Technologijos Universitetas, 2023)In this paper, the application requirement of the Residual Property Model based on the decrescent exponential function is reduced to only one mechanical test datum. For this, by using Creager , Paris's elastic stress field ... -
MWCNTs doped GFRPs drilling: crosscheck among holes obtained by alternative manufacturing methods
(Springer, 2021)In this study, the holes of glass fiber reinforced polymer (GFRP) and multi-walled carbon nanotubes (MWCNTs) doped GFRP composite materials were drilled using abrasive water jet (AWJ), CO2 laser cutting, orbital drilling, ... -
A Novel Biomimetic Wing Design and Optimizing Aerodynamic Performance
(Edit Publishing, 2022)In this article, numerical and experimental analyzes were made by adding winglet and endless blade to the tip of the airfoil to improve the wind turbine blade performance. Similarly, the change in performance was investigated ... -
Obtaining the Fracture Resistance Curve Using the General Displacement
(Kauno Technologijos Universitetas, 2023)In this paper, the energy release energy corre-sponding to the unit crack propagation obtained from the displacement-controlled load-displacement plot is equalized to the elastic energy release rate, and the variation of ... -
Pasif Başkalaşımın Çıkış Varyansı Kısıtlı Kontrolcü İle Yönlendirilen İha Üzerinde Etkileri
(Avrupa Bilim ve Teknoloji Dergisi, 2020)Bu çalışma çıkış varyansı kısıtlı kontrolcü (OVC) ile yönlendirilen pasif başkalaşım yeteneğine sahip İHA’lar hakkında yeni sonuçlar sunmaktadır. Kanat ve kuyruk takımının uçak uzunlamasına ekseninde belli aralıklarda ... -
Simultaneous Longitudinal and Lateral Flight Control Systems Design for Both Passive and Active Morphing TUAVs
(Kauno Technologijos Universitetas, 2017)In this article, simultaneous longitudinal and lateral flight control systems design for both passive and active morphing tactical unmanned aerial vehicles (TUAVs) is first time applied for autonomous flight performance ... -
Simultaneous swept anhedral helicopter blade tip shape and control-system design
(Emerald Group Holdings Ltd., 2022)Purpose: This paper aims to offer a simultaneous design approach for helicopter having swept anhedral blade tip shape and helicopter flight control system (HFCS) to minimize controller cost. Design/methodology/approach: ... -
Simultaneous tailplane of small UAV and autopilot system design
(Emerald Group Publishing Ltd, 2019)Purpose The purpose of this paper is to rise the autonomous flight performance of the small unmanned aerial vehicle (UAV) using simultaneous tailplane of UAV and autopilot system design. Design/methodology/approach A small ... -
Simultaneous UAV having actively sweep angle morphing wing and flight control system design
(Emerald Publishing, 2023)Purpose: The purpose of this paper is to improve autonomous flight performance of an unmanned aerial vehicle (UAV) having actively sweep angle morphing wing using simultaneous UAV and flight control system (FCS) design. ... -
Stochastic redesign of mini UAV wing for maximizing autonomous flight performance
(Emerald Publishing, 2023)PurposeThe purpose of this research paper is to recover the autonomous flight performance of a mini unmanned aerial vehicle (UAV) via stochastically optimizing the wing over certain parameters (i.e. wing taper ratio and ... -
Structural comparison of vertical and horizontal layout of carrying arms of rotary-wing UAV with finite element analysis
(European Mechanical Science, 2023)In this study, numerical analysis of the fuselage of a rotary wing unmanned aerial vehicle was conducted. A fuselage that is resistant to the loads on the fuselage and has maximum lightness has been designed. In this ... -
The Theoretical Value for the Tip Radius of Cracks and Notches
(Kauno Technologijos Universitetas, 2022)In this paper, an additional equation that can be used in conjunction with the Stress Intensity Factor is produced, enabling the determination of all critical fracture stresses, including tensile strength, from only one ... -
Using the Stress Concentration Factor in Determining the Fracture Toughness
(Kauno Technologijos Universitetas, 2022)This paper offers the use of stress concentration factor in determining the critical fracture stress and fracture toughness of polymeric composite materials at various crack length ratios. The stress intensity factor has ... -
Variance constrained trajectory tracking for tandem-rotor helicopters
(Emerald Group Publishing Ltd, 2020)Purpose This paper aims to present novel results for trajectory tracking of tandem-rotor helicopters via variance-constrained controllers. Design/methodology/approach Regarding these purposes, linearized tandem-rotor ...