Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 126, listelenen: 70-89
-
L-1, L-2, and L-3 subshell fluorescence yields: Updated database and new empirical values
(Elsevier, 2016)In this paper, a summary of experimental data published in the period of time between 1955 to february-2016 was presented in a tabular form for L, subshell fluorescence yields (omega(L1), omega(L2) and omega(L3)) taken ... -
M Shell Fluorescence Parameters of Pt, Au and Tl Compounds with Oxygen and Bromide
(Adıyaman University, 2019)In this study, Mβα X-ray production cross-sections and average M-shell fluorescence yields were determined by using EDXRF at 5.96 keV for Pt, Au and Tl compounds. The photo-peak areas were used for the measurement of M ... -
Mechanical Properties and Corrosion Resistance of Borosintered Distaloy Steels
(Springer, 2020)Distaloy SA is a sponge iron powder (nominal composition: Fe-1.75Ni-1.5Cu-0.5Mo) widely used in the production of powder metallurgy (P/M) parts in the automotive industry. In this study, Distaloy SA powders were sintered ... -
Microabrasion Wear Behavior of Fast-Borided Steel Tooth Drill Bits
(Taylor and Francis Inc., 2017)In this study, the surface of steel tooth drill bits (Ni-Cr-Mo based) was subjected to the solid-state boriding treatment with 10- to 50-nm nanoboron powder. Boriding processes were carried out at a constant temperature ... -
Microhydrogen production with water splitting from daily used waste aluminum
(Elsevier, 2021)In this study, different types of waste aluminum produced in daily life and their pure equivalents were evaluated and compared in terms of their hydrogen generation performance through the water-splitting reaction. An ... -
Microstructural and mechanical properties of friction stir welded pure lead
(National Institute of Science Communication and Information Resources (NISCAIR), 2018)The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ... -
Microstructural and Tribological Behavior of Pack-Borided Ni-Based Hastelloy C-276 Superalloy
(Springer, 2022)Although the toughness and corrosion resistance of Ni-based superalloys are high due to their face-centered-cubic structure, their surface hardness and, thus, wear resistance are not satisfactory. The boriding process is ... -
Microstructural characterization, boriding kinetics and tribo-wear behavior of borided Fe-based A286 superalloy
(Elsevier, 2022)Iron-based superalloys are alloys produced for use in corrosive environments as an alternative to high-cost nickel-based superalloys. However, their average strength and hardness, attributed to their austenitic structures, ... -
Microstructural, wear and corrosion characteristics of boronized AISI 904L superaustenitic stainless steel
(Elsevier, 2021)AISI 900 series stainless steels are considered as low-cost alternatives to nickel-based superalloys used for highly corrosive environments. However, in terms of mechanical properties, they have average strength and hardness ... -
Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy
(Elsevier, 2021)CoCrFeNiAl0.25Ti0.5 high entropy alloy alloys (HEA), produced by powder metallurgy were subjected to boriding to improve their mechanical properties. Sintering was carried out at 1200 degrees C for 2 h in Ar, and boriding ... -
Microstructure and mechanical properties of borided inconel 625 superalloy
(Universidade Federal do Rio de Janeiro, 2017)The Ni-based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, ... -
Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0.07Co1.26Cr1.80Fe1.42Mn1.35Ni1.10 high entropy alloy
(Elsevier, 2021)High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high toughness and corrosion resistance, but their average strengths and relatively low wear resistance can limit their engineering ap-plications. ... -
Microwave absorption performance of hexagonal nano boron nitride doped basalt fabric-reinforced epoxy composites
(Emerald Group Publishing Ltd., 2021)Purpose: The purpose of this paper is to investigate the effect of doping element on the microwave absorption performance of hexagonal nano boron nitride (h-nBN)-reinforced basalt fabric (BF)/epoxy composites. A new type ... -
Modulation of Charge Transport at Grain Boundaries in SrTiO3: Toward a High Thermoelectric Power Factor at Room Temperature
(American Chemical Society, 2021)Modulation of the grain boundary properties in thermoelectric materials that have thermally activated electrical conductivity is crucial in order to achieve high performance at low temperatures. In this work, we show ... -
Multipurpose acetic acid functionalized carbazole derivatives: Synthesis, electrochemical properties and electrochromic device applications
(Elsevier, 2022)In this study, synthesis of two multifunctional acetic acid functionalized carbazole bearing monomers; 2-(3,6-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-9H-carbazol-9-yl)acetic acid (M1) and 3,6-dithien-2-yl-9H-carbaz ... -
A new approach to improve some properties of wire arc additively manufactured stainless steel components: Simultaneous homogenization and boriding
(Elsevier, 2023)Arc-directed energy deposition (Arc-DED), also commonly referred to as wire arc additive manufacturing (WAAM), is a cost-effective 3D metal additive manufacturing process in which large metallic parts can be produced due ... -
A new approach to sintering and boriding of steels "Boro-sintering": Formation, microstructure and wear behaviors
(Elsevier, 2020)In this study, sintering and boriding methods are applied as a single step, and it is aimed to gain time and economic advantage. For this purpose, powder mixtures prepared in suitable compositions were subjected to sintering ... -
Niobium Carbide Coatings Grown on Cold Work Tool Steel AISI D3 by Thermomechanical Processing: Characterization, Wear and Corrosion Behaviors
(Springer, 2023)In this study, niobium carbide (NbC) coatings were grown on AISI D3 cold work tool steel via thermoreactive diffusion (TRD) at 900, 1000 and 1100°C for 2, 4, and 6 h. The microstructures and phase formed, the surface ... -
A Novel and Eco-friendly Approach for the Simultaneous Recovery of Copper and Diamond from Waste Cutting Segments via Electrodissolution/Deposition
(Springer, 2021)A new approach is brought to diamond recovery from waste cutting segments. Unlike the commonly used hydrometallurgical processes, this approach offers the simultaneous recovery of copper with diamond. Besides, instead of ... -
A novel paraoxon imprinted electrochemical sensor based on MoS(2)NPs@MWCNTs and its application to tap water samples
(Elsevier, 2022)Organophosphorus pesticides are widely utilized in agricultural fertility. However, their long-term accumulations result in serious damage to human health and ecological balance. Paraoxon (PAR) can block acetylcholinesterase ...