Konu "Mechanical-properties" için Fakülteler listeleme
Toplam kayıt 32, listelenen: 1-20
-
Artificial Intelligence Applications for Friction Stir Welding: A Review
(Korean Institute of Metals and Materials, 2020)Advances in artificial intelligence (AI) techniques that can be used for different purposes have enabled it to be used in many different industrial applications. These are mainly used for modeling, identification, optimization, ... -
Carbonation Depth and Permeability of Quaternary Hybrid Fiber Concretes
(American Society of Civil Engineers (ASCE), 2022)Concrete structures are exposed to water throughout their service life. Nowadays, fiber-reinforced concrete is the most preferred concrete due to its superior mechanical properties. However, good mechanical properties alone ... -
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
(Elsevier, 2021)Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ... -
Characterization and wear behavior of TiBC coatings formed by thermoreactive diffusion technique on AISI D6 steel
(Elsevier, 2020)A two-step Thermo reactive diffusion processes (including an initial titatinizing step followed by boronizing) is proposed in order to obtain superhard complex TiBC coating layer on AISI D6 steel. Microstructural ... -
Characterization of Formaldehyde Emission and Combustion Properties of Peanut (Arachis Hypogaea) Husk-Based Green Composite Panels for Building Applications
(Journal Drvna Industrija, 2022)The building sectors are increasingly in need of more wood-based panels. Forests and environments are being destroyed to produce these wood-based panels. The aim of this study is to protect forest assets by recycling peanut ... -
Characterizations of Microstructure and Properties of Dissimilar AISI 316L/9Ni Low-Alloy Cryogenic Steel Joints Fabricated by Gas Tungsten Arc Welding
(Springer, 2022)The demand for dissimilar joining of steel grades, namely austenitic stainless steels to low-alloy steels, may increase in near future owing to the fact that the storing of LNG is currently becoming a necessity, particularly ... -
Cu/Al levhaların sürtünme karıştırma kaynağında Taguchi metodu ile çekme mukavemeti ve sertlik için optimum kaynak parametrelerinin tahmini
(Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 2019)In this study, the effect of welding parameters on the performance characteristic in the friction stir welding of Cu/Al plates were experimentally investigated. Experiments were designed according to Taguchi L9 orthogonal ... -
Effect of boriding on tribocorrosion behaviour of HSLA offshore mooring chain steel
(Elsevier, 2023)This study explores the transformative potential of boriding to enhance the tribocorrosion resistance of mooring chain steel for offshore environments. The boride layers formed at various temperatures (800 degrees C, 900 ... -
Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718
(Elsevier, 2022)In this study, Ni-based Inconel 718 coatings were additively manufactured on the surface of AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark deposited samples were boronized at 1000 ? ... -
Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar
(Elsevier, 2020)Nano size CaCO3 (n-CaCO3) particles were used as an additive into the Ground Granulated Blast Furnace Slag (GGBS) added mortar to investigate their effects on fresh, hardened properties and acid resistance. Setting time, ... -
The effect of nanoparticle additive on surface milling in glass fiber reinforced composite structures
(SAGE Publications, 2021)In this study, the effect of adding nanosize additive to glass fiber reinforced composite plates on mechanical properties and surface milling was investigated. In the light of the investigations, with the addition of MWCNTs ... -
Effect of powder-pack aluminizing on microstructure and oxidation resistance of wire arc additively manufactured stainless steels
(Elsevier, 2023)This study investigated the effect of powder-pack aluminizing treatment on the high-temperature oxidation of ER307 stainless steel components fabricated by wire arc additive manufacturing (WAAM) during isothermal oxidation ... -
The effects of interface and matrix reinforcements on fracture toughness of E-Glass/epoxy laminate
(Institute of Physics Publishing, 2020)In this study, the effects of low amount (0.1 wt%) multi-walled carbon nanotube (MWCNTs) distributed homogenously in epoxy via cationic surfactant (cetyl pyridiniumchloride-CPC), polyacrylonitrile nanofiber (in the range ... -
An electromagnetic non-destructive approach to determine dispersion and orientation of fiber reinforced concretes
(Elsevier, 2019)Including fibers in concretes improves their mechanical properties such as flexural strength, impact load resistance and limited crack propagation. The dispersion, orientation and types of the fibers placed in the concretes ... -
Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review
(MDPI, 2023)The use of the friction stir welding (FSW) process as a relatively new solid-state welding technology in the aerospace industry has pushed forward several developments in different related aspects of this strategic industry. ... -
Identification Of Chatter Vibrations And Active Vibration Control By Using The Sliding Mode Controller On Dry Turning Of Titanium Alloy (TI6AL4V)
(University of Nis, 2023)In recent years, with the development of sensor technologies, communication platforms, cyber-physical systems, storage technologies, internet applications and controller infrastructures, the way has been opened to produce ... -
Investigation into the influence of boronizing on the wear behavior of additively manufactured Inconel 625 alloy at elevated temperature
(Springer, 2023)Directed energy deposition (DED) technology is a cost-effective additive manufacturing method widely used in the production of complex-shaped parts made of various engineering alloys as well as superalloys due to its ... -
Investigation of cotton fabric composites as a natural radar-absorbing material
(Emerald Group Publishing Ltd., 2020)Purpose The purpose of this paper is to investigate cotton fabric behavior that is exposed to radar waves between selected operation frequencies as an alternative radar-absorbing material (RAM) response. Cotton fabric ... -
Investigation of electromagnetic properties of glass-fiber reinforced epoxy composites containing pan nanofibers with mwcnt/graphene additive
(Parlar Scientific Publications (P S P), 2019)In this work; the differences between of electromagnetic properties of glass fiber reinforced (GFR)-epoxy laminate composites with various nanoparticle doped polyacrylonitrile (PAN) fibers were investigated. The laminated ... -
Investigation of the effect of curing and high temperature on the strength of copolymer added geopolymer mortars
(Taylor and Francis, 2023)Cracks that occur in geopolymer mortars under the influence of high temperature cause a decrease in strength. In this study, ethylene and methyl-acrylate copolymer-based phase change material added (5%, 10% and 15% by mass) ...