Ara
Toplam kayıt 135, listelenen: 121-130
Characterizations of Microstructure and Properties of Dissimilar AISI 316L/9Ni Low-Alloy Cryogenic Steel Joints Fabricated by Gas Tungsten Arc Welding
(Springer, 2022)
The demand for dissimilar joining of steel grades, namely austenitic stainless steels to low-alloy steels, may increase in near future owing to the fact that the storing of LNG is currently becoming a necessity, particularly ...
Electrospinning of PVDF nanofibers incorporated cellulose nanocrystals with improved properties
(Springer, 2022)
Polyvinylidene fluoride (PVDF) nanofibers with cellulose nanocrystals (CNCs) were produced with the electrospinning technique at the CNC loading rates of 0.25, 0.50, 0.75, and 1 wt%. CNCs were obtained with acid hydrolysis ...
Powder-pack boronizing of CoCrFeNiAl0.5Nb0.5 HEA: Modeling of kinetics, microstructural, mechanical, and tribological characterizations
(Elsevier, 2022)
This study is dedicated to the detailed investigation of boronization kinetic, microstructural, mechanical, and wear properties of high entropy alloys (HEAs) considering their sluggish diffusion effect properties. A ...
Chemiresistive CuO sensors for label-free C-reactive protein detection
(Elsevier, 2022)
In this study, we developed fast and highly sensitive, label-free Ca-doped cupric oxide (CuO) based che-miresistive biosensors to detect C-reactive protein (CRP). The Successive Ionic Layer Adsorption and Reaction (SILAR) ...
Low temperature thermoelectric properties of Na-substituted Bi2Ca2Co2Oy ceramics fabricated via LFZ technique
(Elsevier, 2022)
In this work, Bi2Ca2-xNaxCo2Oy with x = 0.0, 0.05, 0.10, and 0.125 thermoelectric ceramic materials have been produced by the classical solid-state route, followed by texturing through the laser floating zone (LFZ) method. ...
Electrospinning of PVDF nanofibers incorporated cellulose nanocrystals with improved properties
(Springer, 2022)
Polyvinylidene fluoride (PVDF) nanofibers with cellulose nanocrystals (CNCs) were produced with the electrospinning technique at the CNC loading rates of 0.25, 0.50, 0.75, and 1 wt%. CNCs were obtained with acid hydrolysis ...
Quasi-static and dynamic response of functionally graded viscoelastic plates
(Elsevier, 2022)
In this study, quasi static and dynamic response of functional graded material (FGM) viscoelastic plates under dynamic loads were investigated. The governing equations of composite plates were obtained with the help of ...
Characterization of electrodeposited Ni-Cr/hBN composite coatings
(Elsevier, 2020)
In this study, NieCr/hBN composite coatings with different hBN content were deposited on AISI 1040mild carbon steel using electrodeposition. The coatings were characterized using scanning electronmicroscopy (SEM), energy ...
Microstructural characterization, boriding kinetics and tribo-wear behavior of borided Fe-based A286 superalloy
(Elsevier, 2022)
Iron-based superalloys are alloys produced for use in corrosive environments as an alternative to high-cost nickel-based superalloys. However, their average strength and hardness, attributed to their austenitic structures, ...
Advances in FSW and FSSW of dissimilar Al-alloy plates
(Taylor and Francis Ltd., 2022)
Numerous industrial applications, particularly those in the transport industry, require the joining of dissimilar materials which offers considerable benefits in terms of low cost, design flexibility, and weight reduction ...