Ara
Toplam kayıt 13, listelenen: 1-10
Examining the receiver heat loss, parametric optimization and exergy analysis of a solar power tower (SPT) system
(Taylor & Francis, 2020)
Thanks to the studies on the material properties of the future solar tower systems and together with the developments in the material science, it has been observed that higher operating temperatures can be possible for SPT ...
Parametric optimization and exergetic analysis comparison of subcritical and supercritical organic Rankine cycle (ORC) for biogas fuelled combined heat and power (CHP) engine exhaust gas waste heat
(Elsevier, 2016)
In this paper, a subcritical and supercritical organic Rankine cycle (ORC) are designed to recover exhaust gas waste heat of biogas fuelled combined heat and power (CHP) engine. The CHP engine is located in Belgium and ...
Exergy analysis of a natural gas fuelled gas turbine based cogeneration cycle
(Inderscience Enterprises Ltd, 2019)
In this paper, the monthly-based annual performance of a natural gas fuelled gas turbine-based cogeneration cycle was analysed. The performance analysis of the system was investigated in three steps. First, the real system ...
Exergy and performance analysis of a CI engine fuelled with HCNG gaseous fuel enriched biodiesel
(Inderscience Enterprises Ltd., 2017)
Soybean oil based fatty acid methyl ester (FAME) is produced and blended with diesel fuel at 25% volumetric ratio. Besides, pure hydrogen (H2) and compressed natural gas (CNG) mixture named HCNG fuel is used with 20 litres ...
Comparison of toluene and cyclohexane as a working fluid of an organic Rankine cycle used for reheat furnace waste heat recovery
(Inderscience Publishers, 2016)
An organic Rankine cycle (ORC) is set up to recover waste heat from the flue gas of a reheat furnace. The calculations show that, under the same conditions, the gross power production, energy and exergy efficiencies are ...
Designing and exergetic analysis of a solar power tower system for Iskenderun region
(Inderscience Publishers, 2019)
In this paper, a steam cycle assisted solar tower power system is designed and parametrically optimised for Iskenderun region by considering the weather conditions. After the optimisation, exergy-based analysis of the ...
Performance improvement of the bottoming steam Rankine cycle (SRC) and organic Rankine cycle (ORC) systems for a triple combined system using gas turbine (GT) as topping cycle
(Elsevier, 2020)
In the present study, performance improvement of SRC and ORC systems used as a bottoming system in a GT based triple combined system was evaluated for varying turbine inlet temperature and pressure. In the first step, SRC ...
Parametric Optimisation of an ORC in a Wood Chipboard Production Facility to Recover Waste Heat Produced from the Drying and Steam Production Process
(Mdpi, 2019)
The wastes in wood industries (waste chips) are commonly used as fuel for burners to produce steam and to use the remaining heat in the drying process. However, in spite of that, there is a considerable amount of heat ...
Exergy analysis and performance improvement of a subcritical/supercritical organic Rankine cycle (ORC) for exhaust gas waste heat recovery in a biogas fuelled combined heat and power (CHP) engine through the use of regeneration
(MDPI, 2019)
In the present study, a subcritical and supercritical regenerative organic Rankine cycle (rORC) was designed. The designed rORCs assist a combined heat and power (CHP) engine, the fuel of which is biogas produced from ...
Optimisation and exergy analysis of an organic Rankine cycle (ORC) used as a bottoming cycle in a cogeneration system producing steam and power
(Elsevier, 2021)
In this study, the advantages of the ORC were used to improve overall performance of a simple gas turbine (GT) located in a wood production facility. In addition to ORC, a steam boiler (SB) is also coupled with the GT to ...