Konu "Behavior" için Makale Koleksiyonu listeleme
Toplam kayıt 9, listelenen: 1-9
-
Determination of the bearing capacity of model ring footings: Experimental and numerical investigations
(Techno Press, 2019)In this paper, it was presented an investigation on the load-settlement and vertical stress analysis of the ring footings on the loose sand bed by conducting both laboratory model tests and numerical analyses. A total of ... -
An electromagnetic non-destructive approach to determine dispersion and orientation of fiber reinforced concretes
(Elsevier, 2019)Including fibers in concretes improves their mechanical properties such as flexural strength, impact load resistance and limited crack propagation. The dispersion, orientation and types of the fibers placed in the concretes ... -
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2022)In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ... -
High-temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber
(Wiley, 2023)In this paper, concretes including three different fiber types (carbon steel fiber [CSF], forta ferro fiber [FFF], and polypropylene fiber [PPF]) with different percentages by volume (0.5%, 1%, and 1.5%) and crumb rubber ... -
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ... -
A Nondestructive Method for Determining Fiber Content and Fiber Ratio in Concretes Using a Metamaterial Sensor Based on a V-Shaped Resonator
(Springer, 2019)A micro sensor based on a V-shaped resonator (VSR) is implemented for the purpose of determining fiber content and ratio in construction materials as a nondestructive method. Concrete is investigated as the construction ... -
Performance optimization of hybrid fiber concrete according to mechanical properties
(Elsevier, 2020)In this research, interactional effects of four different fiber types, (steel, glass, synthetic and polypropylene) fly ash replacement ratio with cement, electrical arc furnace slag replacement ratio with natural aggregate ... -
Prediction of footing settlements with geogrid reinforcement and eccentricity
(ICE Publishing, 2019)This study presents settlement predictions for footings with geogrid reinforcement and biaxial eccentricity using multi-linear regression (MLR) and artificial neural network (ANN) methods. The effects of central, uniaxial ... -
Uniaxial stress-strain relation for low- and normal-strength concrete in compression
(ICE Publishing, 2021)In the modelling and simulation of reinforced concrete structures, accurate definition of material properties is important in terms of obtaining precise results. Among the parameters defining the behaviour of concrete in ...