Ara
Toplam kayıt 17, listelenen: 1-10
Çelik lif ile güçlendirilmiş betonlarda lif yönünü ve dağılımını belirlemede yeni bir yaklaşım
(Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, 2016)
Beton, basınç dayanımı yüksek, çekme dayanımı düşük, gevrek bir malzemedir. Beton içerisinde lifli malzemelerin kullanılması betonun eğilme dayanımını, çekme dayanımını, darbe dayanımını, yorulma direncini, yangın ve ...
Determination of physical properties of concrete by using microwave nondestructive techniques
(Applied Computational Electromagnetics Society (ACES), 2018)
Determination of the electrical properties of concretes with different water/cement ratios and investigation of the relationship between their electrical and mechanical properties is a promising technique towards improving ...
A Nondestructive Method for Determining Fiber Content and Fiber Ratio in Concretes Using a Metamaterial Sensor Based on a V-Shaped Resonator
(Springer, 2019)
A micro sensor based on a V-shaped resonator (VSR) is implemented for the purpose of determining fiber content and ratio in construction materials as a nondestructive method. Concrete is investigated as the construction ...
Mechanical and electromagnetic performance of cement based composites containing different replacement levels of ground granulated blast furnace slag, fly ash, silica fume and rice husk ash
(Elsevier, 2020)
In this study, cement additives were replaced with cement in mortar mixtures by mass. Mortar specimens were prepared with different additives and dosages which were mechanically and electromagnetically tested. According ...
Experimental work on mechanical, electromagnetic and microwave shielding effectiveness properties of mortar containing electric arc furnace slag
(Elsevier, 2018)
It is well known that one of the widely used structural materials is ordinary cement mortar. Whereas the mechanical properties are sufficient as structural materials, its shielding effectiveness and prevention properties ...
Investigation of the mechanic, electromagnetic characteristics and shielding effectiveness of concrete with boron ores and boron containing wastes
(Elsevier, 2020)
In this study, mechanical properties electromagnetic (EM), and shielding effectiveness of concrete samples containing boron product and wastes was investigated in details. In order to increase shielding effectiveness of ...
Metamaterial sensor application concrete material reinforced with carbon steel fiber
(World Scientific Publ Co Pte Ltd, 2020)
In this paper, a rectangular split ring resonator-type metamaterial (MTM) sensor application is demonstrated in order to examine concrete materials. First, different types of concrete materials including carbon steel fiber ...
An electromagnetic non-destructive approach to determine dispersion and orientation of fiber reinforced concretes
(Elsevier, 2019)
Including fibers in concretes improves their mechanical properties such as flexural strength, impact load resistance and limited crack propagation. The dispersion, orientation and types of the fibers placed in the concretes ...
Production of new electromagnetic wave shielder mortar using waste mill scales
(Elsevier, 2020)
Electromagnetic (EM) wave shielder mortar can be produced by mixing cement, natural limestone, tap water with mill scale (mill scale-I and mill scale-II) which is one of the biggest disposal area problems of the iron-steel ...
Synergetic effect of waste tire rubber and mil scale on electromagnetic wave attenuation properties of new generation mortar
(Elsevier, 2020)
In this study, the behaviors of cement based building materials containing a certain amount of crumb rubbers (CR) and mill scales as additives were explored. For this purpose, five different CR content by volume of the ...