Ara
Toplam kayıt 16, listelenen: 1-10
The Effect of Nonwoven Electrospun PAN Nanofiber Mat on Mechanical and Thermal Properties of Epoxy Composites
(2018)
In this study mechanical and thermal properties of epoxy resin reinforced withdifferent numbers of nanofiber layers which produced with electrospinning method wasinvestigated. Solution of 10 wt% of polyacrylonitrile (PAN) ...
Determination of heat transfer coefficient and electromagnetic directional analysis of pomegranate seed
(International Advanced Researches and Engineering Journal, 2019)
As Turkey uses about 25.7% of energy consumption in residential area and doing this with natural gas imported from the abroad, production of efficient insolation materials is important to decrease energy dependence and ...
A review study on ladle slag detection technologies in continuous casting process
(International Advanced Researches and Engineering Journal, 2019)
In steel production, continuous casting method using BOF or EAF is increasing day by day. However, the complex nature of the continuous casting process poses many challenges for steelmakers. During the general steel ...
Experimental investigation of thermal coefficient of the graphene used concrete
(International Advanced Researches and Engineering Journal, 2019)
Today, fossil fuels are used primarily in energy production throughout the world. However, the ever-diminishing energy production and developing technology has encouraged energy recovery, saving or different topics. Grafen ...
A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM
(Sakarya University Journal of Science, 2019)
The Wire Electrical Discharge Machining (Wire EDM) is widely used in the cutting of Bulk Continuous Filament (BCF) spinneret molds. Because of the low surface roughness of the spinneret molds obtained by the Wire EDM method, ...
State of art of hydrogen usage as a fuel on aviation
(State of art of hydrogen usage as a fuel on aviation, 2018)
Air transportation phenomenon is placed with sharing of world energy consumption between 2.5% and 5% totally and showing an increasing perspective approximately 4.8% per year. With the increasing world population and the ...
An autonomous hydrogen production system design based on the solid chemical hydride
(European Mechanical Science, 2022)
This paper develops a hydrogen generator prototype that is for fuel cell systems used in portable applications. This generator is designed based on the use of solid-state hydrides with high hydrogen storage capacity in the ...
A Study On Prediction of Surface Roughness and Cutting Tool Temperature After Turning For S235JR Steel
(Konya Mühendislik Bilimleri Dergisi, 2019)
In machining technologies, the most important criterion taken into consideration whenevaluating the product quality is seen as the surface roughness. In the consideration of productionquality and cost, tool wear is one of ...
MRR, EWR and KERF Analysis in cold work tool steel machining in EDM method by copper and brass electrode
(Osmaniye Korkut Ata Üniversitesi, 2023)
In this study, holes were drilled on the Sleipner cold work tool steel with a hardness of 60-62 HRC by copper and brass electrodes using three different current values (50, 25, 12.5 A), pulse on times (3, 6, 9 μs) and pulse ...
A Response Surface Modeling Study on Effects of Powder Rate and Machining Parameters on Surface Quality of CoCrMo Processed by Powder Mixed Electrical Discharge Machining
(Giresun Üniversitesi, 2023)
Due to the high mechanical strength of the metals used in implant manufacture, which makes them difficult to work with using other machining techniques, electrical discharge machining (EDM) is frequently employed in the ...