Ara
Toplam kayıt 6, listelenen: 1-6
Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
(Institute of Physics Publishing, 2019)
Although friction stir welding (FSW) has widely been applied to aluminum alloys in several industries over the past three decades, it is not yet used in industry for joining of steels. The aim of this study is to characterize ...
Microstructural and mechanical properties of friction stir welded pure lead
(National Institute of Science Communication and Information Resources (NISCAIR), 2018)
The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ...
Microstructure and mechanical properties of friction-stir welded St52 steel joints
(Springer, 2018)
The aim of this work is to investigate the mechanical properties and microstructures of friction-stir welded (FSWed) St52 structural steel joints. In this study, St52 steel plates with a thickness of 4 mm were butt-welded ...
Microstructural and Mechanical Properties of Friction Stir Welded Nickel-Aluminum Bronze (NAB) Alloy
(Springer, 2016)
In this study, the applicability of friction stir welding to cast NAB alloy (i.e., C95800) with a thickness of 9 mm has been investigated. The joint performance was determined by conducting optical microscopy, microhardness ...
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
(Elsevier, 2021)
The unique combination of very large strains, high temperatures and high strain rates inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency on the processing parameters provides ...
Characterization of electrodeposited Ni-Cr/hBN composite coatings
(Elsevier, 2020)
In this study, NieCr/hBN composite coatings with different hBN content were deposited on AISI 1040mild carbon steel using electrodeposition. The coatings were characterized using scanning electronmicroscopy (SEM), energy ...