Ara
Toplam kayıt 20, listelenen: 11-20
Cu/Al levhaların sürtünme karıştırma kaynağında Taguchi metodu ile çekme mukavemeti ve sertlik için optimum kaynak parametrelerinin tahmini
(Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 2019)
In this study, the effect of welding parameters on the performance characteristic in the friction stir welding of Cu/Al plates were experimentally investigated. Experiments were designed according to Taguchi L9 orthogonal ...
Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718
(Elsevier, 2022)
In this study, Ni-based Inconel 718 coatings were additively manufactured on the surface of AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark deposited samples were boronized at 1000 ? ...
Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings
(Elsevier, 2022)
Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI 316 L stainless steel, were pack-borided at 1000 °C for 4 h in open air, high-purity Ar and vacuum environments. The HEA, which had ...
Characterization of electrodeposited Ni-Cr/hBN composite coatings
(Elsevier, 2020)
In this study, NieCr/hBN composite coatings with different hBN content were deposited on AISI 1040mild carbon steel using electrodeposition. The coatings were characterized using scanning electronmicroscopy (SEM), energy ...
Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM)
(Elsevier, 2022)
In contrast to subtractive manufacturing processes, such as machining, and forming processes, additive manufacturing (AM), which is also called 3-D printing, direct digital manufacturing or free form fabrication, is a ...
Wire electric discharge machining and its effect on the surface finish of HfNbTaTiZr refractory high-entropy alloy
(Springer, 2023)
Refractory high-entropy alloys (RHEAs) have high strength and hardness but limited plasticity at room temperature, making them challenging to process and shape using conventional techniques. In the current study, HfNbTaTiZr ...
A new approach to improve some properties of wire arc additively manufactured stainless steel components: Simultaneous homogenization and boriding
(Elsevier, 2023)
Arc-directed energy deposition (Arc-DED), also commonly referred to as wire arc additive manufacturing (WAAM), is a cost-effective 3D metal additive manufacturing process in which large metallic parts can be produced due ...
Characterization of microstructure and high-temperature wear behavior of pack-borided Co-based Haynes 25 superalloy
(Elsevier, 2023)
In this study, the effect of thermochemical boriding on the microstructural properties and high-temperature wear resistance of cobalt-based Haynes 25 superalloy was investigated. Haynes 25 alloy was subjected to a pack-boriding ...
Effect of powder-pack aluminizing on microstructure and oxidation resistance of wire arc additively manufactured stainless steels
(Elsevier, 2023)
This study investigated the effect of powder-pack aluminizing treatment on the high-temperature oxidation of ER307 stainless steel components fabricated by wire arc additive manufacturing (WAAM) during isothermal oxidation ...
Investigation of the wear behavior of FeNi36 alloy cut by WEDM method under different loads
(Emerald Publishing, 2023)
PurposeFeNi36 (Invar-36) alloy is widely used in the fabrication of molding tools in aerospace industries but there remains a need to improve its wear and friction performance due to its relatively low hardness. The formation ...