Ara
Toplam kayıt 27, listelenen: 11-20
Electricity production by wet type top-pressure recovery turbine in blast furnaces
(Pamukkale Üniversitesi, 2020)
Today, the iron and steel industry is critical to energy consumption. The high energy demand of the iron and steel production process brings along high costs. This leads to the need to reduce energy demand and develop ...
The effects of interface and matrix reinforcements on fracture toughness of E-Glass/epoxy laminate
(Institute of Physics Publishing, 2020)
In this study, the effects of low amount (0.1 wt%) multi-walled carbon nanotube (MWCNTs) distributed homogenously in epoxy via cationic surfactant (cetyl pyridiniumchloride-CPC), polyacrylonitrile nanofiber (in the range ...
Friction stir welding of AZ31 magnesium alloys – A numerical and experimental study
(Brazilian Association of Computational Mechanics, 2017)
In this paper, weldability of magnesium alloys by friction stir welding (FSW) method which is difficult to join by the fusion welding have been investigated experimentally and numerically. To this end, the connection of ...
Determination of Barreling of Aluminum Solid Cylinders During Cold Upsetting Using Genetic Algorithm
(UNIV FED RIO DE JANEIRO, LAB HIDROGENIO, 2019)
This study presents Genetic Programming models for the formulation of barreling of aluminum solid cylinders during cold upsetting based on experimental results. The maximum and minimum radii of the barreled cylinders having ...
Exergy analysis and performance improvement of a subcritical/supercritical organic Rankine cycle (ORC) for exhaust gas waste heat recovery in a biogas fuelled combined heat and power (CHP) engine through the use of regeneration
(MDPI, 2019)
In the present study, a subcritical and supercritical regenerative organic Rankine cycle (rORC) was designed. The designed rORCs assist a combined heat and power (CHP) engine, the fuel of which is biogas produced from ...
An Investigation of Punching the MWCNTs Doped Composite Plates by Using Different Cutting Profiles
(University of Osijek, 2021)
In this study, glass fiber reinforced composite layers which are with and without additives of 0.1 wt.% multi walled carbon nanotubes (MWCNTs) of epoxy were manufactured by vacuum infusion method. Unlike the conventional ...
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
(Elsevier, 2021)
The unique combination of very large strains, high temperatures and high strain rates inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency on the processing parameters provides ...
Energy, exergy, economy and environmental (4E) analysis and optimization of single, dual and triple configurations of the power systems: Rankine Cycle/Kalina Cycle, driven by a gas turbine
(Elsevier, 2021)
Improving the overall efficiency of a present power system has significant importance as much as developing renewable energy systems. Because, there are many constructed power systems, which damages the environment by ...
Isı-güç kombine sistemlerinde kullanılan kalina çevriminin enerji ve ekserji analizi
(Politeknik Dergisi, 2020)
Küresel ısınmanın giderek arttığı ve hava kirliliğinin insan sağlığını hissedilebilir şekilde tehdit ettiği bugünlerde, enerjiye olan ihtiyaç da giderek artmaktadır. Bu nedenle sadece insanların enerji ihtiyacını karşılamak ...
Bir modal empedans tabanlı istatistiksel enerji analizi yordamı ile çizgisel bağlantılı belirsiz kompozit yapıların orta ve yüksek frekans titreşim analizi
(Gazi Üniversitesi Mühendislik-Mimarlık, 2019)
In this study, mid and high frequency vibration analysis of line connected composite structures having structural uncertainty obtained by mass variability is performed by using a procedure of modal impedance based statistical ...