Ara
Toplam kayıt 135, listelenen: 31-40
Microabrasion Wear Behavior of Fast-Borided Steel Tooth Drill Bits
(Taylor and Francis Inc., 2017)
In this study, the surface of steel tooth drill bits (Ni-Cr-Mo based) was subjected to the solid-state boriding treatment with 10- to 50-nm nanoboron powder. Boriding processes were carried out at a constant temperature ...
Performance improvement of the bottoming steam Rankine cycle (SRC) and organic Rankine cycle (ORC) systems for a triple combined system using gas turbine (GT) as topping cycle
(Elsevier, 2020)
In the present study, performance improvement of SRC and ORC systems used as a bottoming system in a GT based triple combined system was evaluated for varying turbine inlet temperature and pressure. In the first step, SRC ...
Boride Layer Growth Kinetics Of Aisi H13 Steel Borided With Nano-Sized Powders
(Polish Academy Sciences, Institute Metallurgy & Materials Sciences, 2018)
Growth kinetics of boride layers in AISI H13 steel was investigated using the pack bonding method at temperatures of 1073, 1173 and 1273 K (800 degrees C, 900 degrees C and 1000 degrees C) for periods of 2, 4 and 6 h with ...
Thermodynamic analysis of solid waste and energy consumption to reduce the effects of an electric arc furnace on the environment
(Inderscience Enterprises Ltd., 2019)
In this study, thermodynamic analysis of an EAF was made to reduce solid wastes and energy consumptions. Then, the slag formation, quicklime consumption and daily energy consumption of the EAF were optimised for different ...
Exergetic Simulation and Performance Analysis of the Effect of Flow Patterns in PEMFCs
(Int Center Applied Thermodynamics, 2019)
In this study, 6 different novel flow channels of the "proton exchange membrane" (PEM) type fuel cells were designed and modeled, while evaluations were conducted on three-dimensional channels of various designs using ...
Microstructural and mechanical properties of friction stir welded pure lead
(National Institute of Science Communication and Information Resources (NISCAIR), 2018)
The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending ...
Performance analysis of a novel organic fluid filled regenerative heat exchanger used heat recovery ventilation (OHeX-HRV) system
(Elsevier, 2020)
In this study, a novel organic fluid-filled regenerative heat exchanger used heat recovery ventilation (OHeX-HRV) system was designed. Five organic-based fluids (R11, R123, R245fa, n-Pentane and Isopentane) were selected ...
Performance & emission analysis of HHO enriched dual-fuelled diesel engine with artificial neural network prediction approaches
(Elsevier, 2020)
Most of the studies on conventional fuel types that can be used in internal combustion engines have been made in order to improve performance values. Nowadays environmental problems have shown that emission values are more ...
Experimental study on accelerometer-based ladle slag detection in continuous casting process
(Springer London, 2020)
The share of continuous casting method is increased day by day among steel production methods. In continuous casting plants, steel production is carried out using BOF (basic oxygen furnace) or EAF (electric arc furnace). ...
Improving Autonomous Performance of a Passive Morphing Fixed Wing UAV
(Kauno Technologijos Universitetas, 2020)
In this article, simultaneous longitudinal and lateral flight control systems design for both passive and active morphing unmanned aerial vehicles (UAVs) is first time applied for autonomous flight performance maximization. ...