Ara
Toplam kayıt 156, listelenen: 71-80
Experimental investigation of thermal coefficient of the graphene used concrete
(International Advanced Researches and Engineering Journal, 2019)
Today, fossil fuels are used primarily in energy production throughout the world. However, the ever-diminishing energy production and developing technology has encouraged energy recovery, saving or different topics. Grafen ...
A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM
(Sakarya University Journal of Science, 2019)
The Wire Electrical Discharge Machining (Wire EDM) is widely used in the cutting of Bulk Continuous Filament (BCF) spinneret molds. Because of the low surface roughness of the spinneret molds obtained by the Wire EDM method, ...
Fatigue analysis of bolted flange joints of a rotary dryer
(Elsevier, 2016)
This paper describes the fatigue failure of a rotary dryer in a chemical plant. The process conditions required the dryer to be rotated continuously at a speed of about two and half revolutions per minute. The shell structure ...
State of art of hydrogen usage as a fuel on aviation
(State of art of hydrogen usage as a fuel on aviation, 2018)
Air transportation phenomenon is placed with sharing of world energy consumption between 2.5% and 5% totally and showing an increasing perspective approximately 4.8% per year. With the increasing world population and the ...
MWCNTs doped GFRPs drilling: crosscheck among holes obtained by alternative manufacturing methods
(Springer, 2021)
In this study, the holes of glass fiber reinforced polymer (GFRP) and multi-walled carbon nanotubes (MWCNTs) doped GFRP composite materials were drilled using abrasive water jet (AWJ), CO2 laser cutting, orbital drilling, ...
Optimisation and exergy analysis of an organic Rankine cycle (ORC) used as a bottoming cycle in a cogeneration system producing steam and power
(Elsevier, 2021)
In this study, the advantages of the ORC were used to improve overall performance of a simple gas turbine (GT) located in a wood production facility. In addition to ORC, a steam boiler (SB) is also coupled with the GT to ...
Estimation of wind energy power using different artificial intelligence techniques and empirical equations
(Taylor and Francis, 2021)
The understanding of the behavior of a wind turbine is difficult due to changes in weather conditions. To obtain the response of a wind turbine influenced by changes in both wind speed and its direction, using the ...
An Investigation of Punching the MWCNTs Doped Composite Plates by Using Different Cutting Profiles
(University of Osijek, 2021)
In this study, glass fiber reinforced composite layers which are with and without additives of 0.1 wt.% multi walled carbon nanotubes (MWCNTs) of epoxy were manufactured by vacuum infusion method. Unlike the conventional ...
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
(Elsevier, 2021)
The unique combination of very large strains, high temperatures and high strain rates inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency on the processing parameters provides ...
Investigation of cotton fabric composites as a natural radar-absorbing material
(Emerald Group Publishing Ltd., 2020)
Purpose The purpose of this paper is to investigate cotton fabric behavior that is exposed to radar waves between selected operation frequencies as an alternative radar-absorbing material (RAM) response. Cotton fabric ...