Ara
Toplam kayıt 6, listelenen: 1-6
An Investigation of Punching the MWCNTs Doped Composite Plates by Using Different Cutting Profiles
(University of Osijek, 2021)
In this study, glass fiber reinforced composite layers which are with and without additives of 0.1 wt.% multi walled carbon nanotubes (MWCNTs) of epoxy were manufactured by vacuum infusion method. Unlike the conventional ...
MRR, EWR and KERF Analysis in cold work tool steel machining in EDM method by copper and brass electrode
(Osmaniye Korkut Ata Üniversitesi, 2023)
In this study, holes were drilled on the Sleipner cold work tool steel with a hardness of 60-62 HRC by copper and brass electrodes using three different current values (50, 25, 12.5 A), pulse on times (3, 6, 9 μs) and pulse ...
The Effects of Using Brass and Copper Wires on the Cutting Quality of Sleipner Cold Work Steel Cut by WEDM
(Journal of Materials and Mechatronics, 2022)
Wire electric discharge machining (WEDM) is widely used in dies, punches, aerospace and automotive sectors, since materials with high hardness, and temperature resistant, which are not possible to be cut with conventional ...
The Effects of Cutting Parameters Used in Milling X153CrMoV12 Cold Work Tool Steel by End Mills on Surface Roughness and Hardness of The Workpiece
(Gazi Üniversitesi, 2022)
The goal of this project is to investigate the effect of the spindle speed and feed rate used in milling X153CrMoV12 cold work steel by X5070 blue coated solid carbide end mill on surface roughness and hardness of the ...
The Effects of Cutting Parameters on the Kerf and Surface Roughness on the Electrode in Electro Erosion Process
(Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2021)
Bu çalışmada elektro erozyon yöntemi ve Cupro MAX CuCrZr elektrot kullanılarak, ısıl işlem
görmüş 60-62 HRC sertliğe sahip soğuk iş takım çeliğinden talaş kaldırma neticesinde meydana
gelen elektrot aşınması incelenmiştir. ...
Sleipner Soğuk İş Takım Çeliğinin Elektro-Erozyon Tezgahında Bakır Krom Zirkonyum Alaşımı Elektrot ile İşlenmesinde İşleme Parametrelerinin Kerf ve Yüzey Pürüzlülüğü Üzerine Etkisinin İncelenmesi
(Giresun Üniversitesi, 2021)
Bu çalışmada 60-62 HRC sertlik değerine sahip Sleipner Soğuk İş Takım Çeliğinden Bakır Krom Zirkonyum Alaşımı Elektrot kullanılarak elektro erozyon işleme (EEİ) yöntemi ile talaş kaldırılmıştır. Bu kapsamda üç farklı boşalım ...