Ara
Toplam kayıt 8, listelenen: 1-8
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...
Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
(Institute of Physics Publishing, 2019)
Although friction stir welding (FSW) has widely been applied to aluminum alloys in several industries over the past three decades, it is not yet used in industry for joining of steels. The aim of this study is to characterize ...
Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
(Korean Institute of Metals and Materials, 2019)
Abstract: In this study, the surface of AISI H13 steel was borided with powder blends of B4C and NaBF4 using the powder-pack method at 800, 900 and 1000 °C for 2, 4 and 6 h. The structural and mechanical characteristics ...
CO2-induced mechanical behaviour of Hawkesbury sandstone in the Gosford basin: An experimental study
(Elsevier, 2015)
Carbon dioxide (CO2) sequestered in saline aquifers undergoes a variety of chemically-coupled mechanical effects, which may cause CO2-induced mechanical changes and time-dependent reservoir deformation. This paper investigates ...
Properties and tribological performance of ceramic-base chromium and vanadium carbide composite coatings
(Elsevier, 2019)
In the current study, the surface of AISI D2 steel was coated with the powder blends of ferro-vanadium (Fe-V) and ferro-chromium (Fe-Cr). The coatings were performed using a thermo-reactive diffusion (TRD) treatment by the ...
Comparative experimental study on the modification of microstructural and mechanical properties of friction stir welded and gas metal arc welded EN AW-6061 O aluminum alloys by post-weld heat treatment
(Wiley-VCH Verlag, 2018)
In this paper, the effects of post-weld heat treatment on modification of microstructures and mechanical properties of friction stir welded and gas metal arc welded AA6061-O plates were compared with each other. Gas metal ...
Microstructure and mechanical properties of friction-stir welded St52 steel joints
(Springer, 2018)
The aim of this work is to investigate the mechanical properties and microstructures of friction-stir welded (FSWed) St52 structural steel joints. In this study, St52 steel plates with a thickness of 4 mm were butt-welded ...
Effects of ultrasonication and conventional mechanical homogenization processes on the structures and dielectric properties of BaTiO3 ceramics
(Elsevier, 2017)
The effects of the homogenization process on the structures and dielectric properties of pure and Nb-doped BaTiO3 ceramics have been investigated using an ultrasonic homogenization and conventional mechanical methods. The ...