Ara
Toplam kayıt 10, listelenen: 1-10
Microabrasion Wear Behavior of Fast-Borided Steel Tooth Drill Bits
(Taylor and Francis Inc., 2017)
In this study, the surface of steel tooth drill bits (Ni-Cr-Mo based) was subjected to the solid-state boriding treatment with 10- to 50-nm nanoboron powder. Boriding processes were carried out at a constant temperature ...
Microstructural, wear and corrosion characteristics of boronized AISI 904L superaustenitic stainless steel
(Elsevier, 2021)
AISI 900 series stainless steels are considered as low-cost alternatives to nickel-based superalloys used for highly corrosive environments. However, in terms of mechanical properties, they have average strength and hardness ...
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
(Elsevier, 2021)
Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ...
TTribocorrosion behavior of boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high entropy alloy
(Elsevier, 2021)
Boride layers were grown on the surface of a Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high-entropy alloy (HEA) by boronizing at temperatures of 900, 950 and 1000 degrees C for 4 h using nanosized boronizing powders. ...
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
(Elsevier, 2021)
Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ...
Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0.07Co1.26Cr1.80Fe1.42Mn1.35Ni1.10 high entropy alloy
(Elsevier, 2021)
High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high toughness and corrosion resistance, but their average strengths and relatively low wear resistance can limit their engineering ap-plications. ...
Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings
(Elsevier, 2022)
Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI 316 L stainless steel, were pack-borided at 1000 °C for 4 h in open air, high-purity Ar and vacuum environments. The HEA, which had ...
Microstructural characterization, boriding kinetics and tribo-wear behavior of borided Fe-based A286 superalloy
(Elsevier, 2022)
Iron-based superalloys are alloys produced for use in corrosive environments as an alternative to high-cost nickel-based superalloys. However, their average strength and hardness, attributed to their austenitic structures, ...
Effect of boriding on high temperature tribological behavior of CoCrMo alloy
(Elsevier, 2023)
In the present work, CoCrMo alloy surfaces were subjected to powder-pack boriding at 950 & DEG;C for 5-hour and 7 -hour treatment periods. The obtained boride layers were characterized with scanning electron microscopy, ...
Effect of boriding on tribocorrosion behaviour of HSLA offshore mooring chain steel
(Elsevier, 2023)
This study explores the transformative potential of boriding to enhance the tribocorrosion resistance of mooring chain steel for offshore environments. The boride layers formed at various temperatures (800 degrees C, 900 ...