Ara
Toplam kayıt 85, listelenen: 11-20
Improving the aging resistance of bitumen by addition of polymer based diethylene glycol
(Elsevier, 2018)
This study deals with improving the short-term aging resistance of bitumen with a new material, a diethylene glycol based polyboron compound (DEGPB). The compound was synthesized chemically and used 50/70 penetration grade ...
Enhancing electrochemical and electrochromic performances of carbazole comprising monomer via copolymerization with 3,4-ethylenedioxythiophene (EDOT)
(Elsevier, 2020)
In this study, two novel electrochromic copolymers (CoP1.3 and CoP1.5) were synthesized via electrochemical methods and characterized. The comonomers used in the synthesis were 3,4-ethylenedioxythiophene (EDOT) and a ...
Properties and High Temperature Dry Sliding Wear Behavior of Boronized Inconel 718
(Springer, 2020)
Silicide-free boride layers were grown on Inconel 718 Ni-based superalloy surface at 850 degrees C, 950 degrees C, and 1050 degrees C for 2, 4, 6 hour by the powder pack-boronizing process using nano-sized B4C powders. The ...
Sensitive Metamaterial Sensor for Distinction of Authentic and Inauthentic Fuel Samples
(Springer, 2017)
A metamaterial-based sensor has been realized to distinguish authentic and inauthentic fuel samples in the microwave frequency regime. Unlike the many studies in literature on metamaterial-based sensor applications, this ...
Artificial neural network approach for locomotive maintenance by monitoring dielectric properties of engine lubricant
(Elsevier, 2019)
In this paper, we proposed an approach for locomotive maintenance systems by observing engine lube oil. The mechanical particles in lube oil give information about locomotive engine system condition. The engine lubricant ...
A Nondestructive Method for Determining Fiber Content and Fiber Ratio in Concretes Using a Metamaterial Sensor Based on a V-Shaped Resonator
(Springer, 2019)
A micro sensor based on a V-shaped resonator (VSR) is implemented for the purpose of determining fiber content and ratio in construction materials as a nondestructive method. Concrete is investigated as the construction ...
Broad band MA-based on three-type resonator having resistor for microwave energy harvesting
(Taylor and Francis Inc., 2017)
We proposed metamaterial absorber having multi-type split coin resonator based on resistive loads. The numerical simulation results and experimental measurements indicate that broad band absorption with a ratio over 80% ...
Wideband metamaterial absorber based on CRRs with lumped elements for microwave energy harvesting
(Taylor & Francis, 2018)
A novel metamaterial absorber structure is designed and characterized for microwave energy harvesting. The suggested structure is composed of two circular ring resonators with different dimensions. Due to harvesting ...
Removal of Cr(VI) from aqueous solution by pyrolytic charcoals
(Editorial Board of New Carbon Materials, 2016)
Bio-chars produced by the pyrolysis of walnut shells at 450? (BC450) and theco-pyrolysis of walnut shells and 20 wt% tar sand (BCTS20)at the same temperature, were investigated as potential adsorbents for the removal of ...
Determinations of in-situ energy loss factors of point-connected composite plates
(Elsevier, 2016)
Statistical energy analysis is a widely used high frequency vibro-acoustic analysis tool. It is based on power flow balance between subsystems. Its accuracy mainly depends on precise determination of energy loss factors. ...