Yazar "Yağlı, Hüseyin" için Araştırma Çıktıları | Web of Science İndeksli Yayınlar Koleksiyonu listeleme
-
Parametric optimization and exergetic analysis comparison of subcritical and supercritical organic Rankine cycle (ORC) for biogas fuelled combined heat and power (CHP) engine exhaust gas waste heat
Yağlı, Hüseyin; Koç, Yıldız; Koç, Ali; Görgülü, Adnan; Tandıroğlu, Ahmet (Elsevier, 2016)In this paper, a subcritical and supercritical organic Rankine cycle (ORC) are designed to recover exhaust gas waste heat of biogas fuelled combined heat and power (CHP) engine. The CHP engine is located in Belgium and ... -
Performance analysis of a novel organic fluid filled regenerative heat exchanger used heat recovery ventilation (OHeX-HRV) system
Koç, Ali; Yağlı, Hüseyin; Bilgiç, Hasan Hüseyin; Koç, Yıldız; Özdemir, Ayşenur (Elsevier, 2020)In this study, a novel organic fluid-filled regenerative heat exchanger used heat recovery ventilation (OHeX-HRV) system was designed. Five organic-based fluids (R11, R123, R245fa, n-Pentane and Isopentane) were selected ... -
Performance and environmental improvements of a geothermal power plant by using structural and operational modification techniques
Baydar, Ceyhun; Yağlı, Hüseyin; Koç, Yıldız; Koç, Ali; Artaş, Sultan Büşra (Institution of Chemical Engineers, 2023)Performance data from a geothermal power plant that uses a dry-type working fluid (n-Pentane) was evaluated. The experimental working conditions of the geothermal power plant were recorded. By using these recorded data the ... -
Performance improvement of the bottoming steam Rankine cycle (SRC) and organic Rankine cycle (ORC) systems for a triple combined system using gas turbine (GT) as topping cycle
Köse, Özkan; Koç, Yıldız; Yağlı, Hüseyin (Elsevier, 2020)In the present study, performance improvement of SRC and ORC systems used as a bottoming system in a GT based triple combined system was evaluated for varying turbine inlet temperature and pressure. In the first step, SRC ... -
Pinch point determination and Multi-Objective optimization for working parameters of an ORC by using numerical analyses optimization method
Kocaman, Emrullah; Karakuş, Cuma; Yağlı, Hüseyin; Koç, Yıldız; Yumrutaş, Recep; Koç, Ali (Elsevier, 2022)In parallel with Kyoto, Paris and the green production agreements, the nowadays crucial subject is minimising energy consumption, increasing renewable energy usage and recovering waste heat. When it comes to waste heat, ... -
Thermodynamic analysis of solid waste and energy consumption to reduce the effects of an electric arc furnace on the environment
Koç, Yıldız; Yağlı, Hüseyin; Özdeş, Enver Onur; Baltacıoğlu, Ertuğrul; Koç, Ali (Inderscience Enterprises Ltd., 2019)In this study, thermodynamic analysis of an EAF was made to reduce solid wastes and energy consumptions. Then, the slag formation, quicklime consumption and daily energy consumption of the EAF were optimised for different ... -
Which power cycle is the best fit for parabolic trough solar collectors? A comparative and comprehensive case study for six sub-configurations of the three main cycles
Ata, Sadık; Köse, Özkan; Tutumlu, Hakan; Yağlı, Hüseyin; Koç, Yıldız; Koç, Ali (Elsevier, 2023)In this study, the integration of a Parabolic Trough Collector with different power cycles was investigated on an annual basis in terms of Energy, Exergy, Economics and Environmental under different meteorological conditions. ... -
Why Kalina (Ammonia-Water) cycle rather than steam Rankine cycle and pure ammonia cycle: A comparative and comprehensive case study for a cogeneration system
Aksar, Merve; Yağlı, Hüseyin; Koç, Yıldız; Koç, Ali; Sohani, Ali; Yumrutaş, Recep (Elsevier, 2022)There are many studies on the Kalina cycle and steam Rankine cycles. However, there are not enough comparative and descriptive studies on why the Kalina cycle or steam Rankine cycle should be selected. In addition to that, ...