Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 126, listelenen: 85-104
-
A new approach to improve some properties of wire arc additively manufactured stainless steel components: Simultaneous homogenization and boriding
(Elsevier, 2023)Arc-directed energy deposition (Arc-DED), also commonly referred to as wire arc additive manufacturing (WAAM), is a cost-effective 3D metal additive manufacturing process in which large metallic parts can be produced due ... -
A new approach to sintering and boriding of steels "Boro-sintering": Formation, microstructure and wear behaviors
(Elsevier, 2020)In this study, sintering and boriding methods are applied as a single step, and it is aimed to gain time and economic advantage. For this purpose, powder mixtures prepared in suitable compositions were subjected to sintering ... -
Niobium Carbide Coatings Grown on Cold Work Tool Steel AISI D3 by Thermomechanical Processing: Characterization, Wear and Corrosion Behaviors
(Springer, 2023)In this study, niobium carbide (NbC) coatings were grown on AISI D3 cold work tool steel via thermoreactive diffusion (TRD) at 900, 1000 and 1100°C for 2, 4, and 6 h. The microstructures and phase formed, the surface ... -
A Novel and Eco-friendly Approach for the Simultaneous Recovery of Copper and Diamond from Waste Cutting Segments via Electrodissolution/Deposition
(Springer, 2021)A new approach is brought to diamond recovery from waste cutting segments. Unlike the commonly used hydrometallurgical processes, this approach offers the simultaneous recovery of copper with diamond. Besides, instead of ... -
A novel paraoxon imprinted electrochemical sensor based on MoS(2)NPs@MWCNTs and its application to tap water samples
(Elsevier, 2022)Organophosphorus pesticides are widely utilized in agricultural fertility. However, their long-term accumulations result in serious damage to human health and ecological balance. Paraoxon (PAR) can block acetylcholinesterase ... -
Numerical thickness optimization study of CIGS based solar cells with wxAMPS
(Elsevier GmbH, 2016)In this paper, a numerical investigation of the effects of thickness of absorber and buffer layers for a typical CIGS based solar cell was carried out for the first time, employing the wxAMPS software which is a new ... -
Pack-Boriding of Monel 400: Microstructural Characterization and Boriding Kinetics
(Korean Institute of Metals and Materials, 2021)Monel 400 was pack-borided in the temperature range of 1173-1273 K for exposure times of 2-6 h. The boride layers produced on the surface of the alloy were examined by scanning electron microscopy and phase identification ... -
Performance of two low-cost GPS receivers for ground speed measurement under varying speed conditions
(Springer, 2017)A global positioning system (GPS) receiver is an important sensor used in modern farming, particularly in precision agriculture to determine geographic location and ground speed. The aim of this study was to investigate ... -
Photovoltaic performance of magnetron sputtered antimony selenide thin film solar cells buffered by cadmium sulfide and cadmium sulfide/zinc sulfide
(Elsevier, 2023)Antimony selenide (Sb2Se3)-based thin-film solar cells have recently attracted worldwide attention as an abundant, low-cost, and efficient photovoltaic technology. The highest efficiencies recorded for Sb2Se3 solar cells ... -
Polarization-based surface enhanced Raman scattering from single colloidal DNA decorated with 3 nm silicon nanoparticles
(American Institute of Physics Inc., 2021)Surface enhanced Raman scattering (SERS), in which sample molecules are placed in the proximity of conducting nanostructures, subjects the molecules to intense electron oscillation (plasmon) field. The intense field, ... -
Powder-pack boronizing of CoCrFeNiAl0.5Nb0.5 HEA: Modeling of kinetics, microstructural, mechanical, and tribological characterizations
(Elsevier, 2022)This study is dedicated to the detailed investigation of boronization kinetic, microstructural, mechanical, and wear properties of high entropy alloys (HEAs) considering their sluggish diffusion effect properties. A ... -
Prediction of shrinkage ratio of ZA-27 die casting alloy using artificial neural network, computer aided simulation, and comparison with experimental studies
(Sharif University of Technology, 2021)In cast alloys with a long freezing range such as ZA-27, casting defects like porosity and shrinkage may occur in case of failure to control casting variables. In this study, the role of casting variables in the formation ... -
Production of new electromagnetic wave shielder mortar using waste mill scales
(Elsevier, 2020)Electromagnetic (EM) wave shielder mortar can be produced by mixing cement, natural limestone, tap water with mill scale (mill scale-I and mill scale-II) which is one of the biggest disposal area problems of the iron-steel ... -
Properties and Corrosion Behavior of Chromium and Vanadium Carbide Composite Coatings Produced on Ductile Cast Iron by Thermoreactive Diffusion Technique
(ASME, 2020)Ductile iron (DI) owes many of its attractive mechanical properties to the graphite nodules in its structure. However, since galvanic coupling can occur between the graphite nodules and the matrix in aggressive environments, ... -
Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
(Korean Institute of Metals and Materials, 2019)Abstract: In this study, the surface of AISI H13 steel was borided with powder blends of B4C and NaBF4 using the powder-pack method at 800, 900 and 1000 °C for 2, 4 and 6 h. The structural and mechanical characteristics ... -
Properties and Corrosion Resistance of Borided AISI H11 Tool Steel
(Asme, 2020)In this study, the effect of different boriding parameters on some mechanical properties and corrosion resistance of AISI H11 steel, which is extensively used in hot and cold processing applications, was investigated. The ... -
Properties and High Temperature Dry Sliding Wear Behavior of Boronized Inconel 718
(Springer, 2020)Silicide-free boride layers were grown on Inconel 718 Ni-based superalloy surface at 850 degrees C, 950 degrees C, and 1050 degrees C for 2, 4, 6 hour by the powder pack-boronizing process using nano-sized B4C powders. The ... -
Properties and High-Temperature Wear Behavior of Remelted NiCrBSi Coatings
(Springer, 2020)Remelted NiCrBSi coatings were examined using optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, x-ray diffraction analysis, microhardness and wear testing. After wear tests, the surfaces of ... -
Properties and Tribologic Behavior of Titanium Carbide Coatings on AISI D2 Steel Deposited by Thermoreactive Diffusion
(Springer, 2018)In the present study, the metallographic, mechanical and tribologic behaviors of AISI D2 steel specimens coated with TiC through the titanizing process were investigated. The titanizing treatment was performed at the ... -
Properties and tribological performance of ceramic-base chromium and vanadium carbide composite coatings
(Elsevier, 2019)In the current study, the surface of AISI D2 steel was coated with the powder blends of ferro-vanadium (Fe-V) and ferro-chromium (Fe-Cr). The coatings were performed using a thermo-reactive diffusion (TRD) treatment by the ...