Ara
Toplam kayıt 186, listelenen: 121-130
A comprehensive comparative energy and exergy analysis in solar based hydrogen production systems
(Elsevier, 2021)
In the presented paper, energy and exergy analysis is performed for thermochemical hydrogen (H2) production facility based on solar power. Thermal power used in thermochemical cycles and electricity production is obtained ...
Cu/Al levhaların sürtünme karıştırma kaynağında Taguchi metodu ile çekme mukavemeti ve sertlik için optimum kaynak parametrelerinin tahmini
(Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 2019)
In this study, the effect of welding parameters on the performance characteristic in the friction stir welding of Cu/Al plates were experimentally investigated. Experiments were designed according to Taguchi L9 orthogonal ...
Analysis of a Kalina cycle integrated with a reheat furnace
(Inderscience Publishers, 2022)
In the present paper, parametric optimisation, energy and exergy analyses of KC were performed together with economic and environmental analyses. After parametric, energy and exergy analyses of KC, maximum net power ...
Advancements and current technologies on hydrogen fuel cell applications for marine vehicles
(Elsevier, 2022)
Maritime industry has led renewable energy sources for the greener environment and efficient vehicles that effect by increasing population and energy demands. Hydrogen is one of the most popular of these renewable energy ...
Modeling of a Combined Kalina and Organic Rankine Cycle System for Waste Heat Recovery from Biogas Engine
(MDPI, 2022)
Converting waste heat into electricity has captured the interest of scientists for years because of its enormous potential to improve energy efficiency and to lessen environmental impacts. While there are numerous applications ...
Is Kalina cycle or organic Rankine cycle for industrial waste heat recovery applications? A detailed performance, economic and environment based comprehensive analysis
(Elsevier, 2022)
Contrary to the increase in energy demand throughout the world, fossil fuels, which are the main energy source, is now more difficult to reach because of the pandemic, transport or bilateral relations, etc. These obstacles ...
Why Kalina (Ammonia-Water) cycle rather than steam Rankine cycle and pure ammonia cycle: A comparative and comprehensive case study for a cogeneration system
(Elsevier, 2022)
There are many studies on the Kalina cycle and steam Rankine cycles. However, there are not enough comparative and descriptive studies on why the Kalina cycle or steam Rankine cycle should be selected. In addition to that, ...
Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718
(Elsevier, 2022)
In this study, Ni-based Inconel 718 coatings were additively manufactured on the surface of AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark deposited samples were boronized at 1000 ? ...
A study on microstructure and mechanical performance of gas metal arc welded AISI 304 L joints
(Wiley, 2022)
Arc welding is a widely applied process in the fabrication of stainless steel structures. Various difficulties may arise in joining of these steels, particularly if high heat input is used. The main aim of this study is ...
A review on drilling of FML stacks with conventional and unconventional processing methods under different conditions
(Elsevier, 2022)
Fiber and metal materials used in Fiber Metal Laminate (FML) have different machinability properties due to their different structures. This case has made it a research topic to obtain good hole quality in these materials. ...