Ara
Toplam kayıt 103, listelenen: 1-10
Energy distribution analyses of an additional traction battery on hydrogen fuel cell hybrid electric vehicle
(Elsevier Ltd, 2019)
Hydrogen is the most abundant element in the world and produces only water vapor as a result of chemical reaction that occurred in fuel cells. Therefore, fuel cell electric vehicles, which use hydrogen as fuel, continue ...
Applicability of friction stir welding to steels
(International OCSCO World Press, 2017)
Purpose: The friction stir welding (FSW) method is widely considered to be one of the most significant developments in joining technology to emerge in the last 30 years. The technique has originally been developed for ...
Estimation of wind energy power using different artificial intelligence techniques and empirical equations
(Taylor and Francis Inc., 2019)
The understanding of the behavior of a wind turbine is difficult due to changes in weather conditions. To obtain the response of a wind turbine influenced by changes in both wind speed and its direction, using the ...
Investigation of electromagnetic properties of glass-fiber reinforced epoxy composites containing pan nanofibers with mwcnt/graphene additive
(Parlar Scientific Publications (P S P), 2019)
In this work; the differences between of electromagnetic properties of glass fiber reinforced (GFR)-epoxy laminate composites with various nanoparticle doped polyacrylonitrile (PAN) fibers were investigated. The laminated ...
Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
(Institute of Physics Publishing, 2019)
Although friction stir welding (FSW) has widely been applied to aluminum alloys in several industries over the past three decades, it is not yet used in industry for joining of steels. The aim of this study is to characterize ...
Examining the receiver heat loss, parametric optimization and exergy analysis of a solar power tower (SPT) system
(Taylor & Francis, 2020)
Thanks to the studies on the material properties of the future solar tower systems and together with the developments in the material science, it has been observed that higher operating temperatures can be possible for SPT ...
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier, 2018)
Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ...
Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
(Korean Institute of Metals and Materials, 2019)
Abstract: In this study, the surface of AISI H13 steel was borided with powder blends of B4C and NaBF4 using the powder-pack method at 800, 900 and 1000 °C for 2, 4 and 6 h. The structural and mechanical characteristics ...
Parametric optimization and exergetic analysis comparison of subcritical and supercritical organic Rankine cycle (ORC) for biogas fuelled combined heat and power (CHP) engine exhaust gas waste heat
(Elsevier, 2016)
In this paper, a subcritical and supercritical organic Rankine cycle (ORC) are designed to recover exhaust gas waste heat of biogas fuelled combined heat and power (CHP) engine. The CHP engine is located in Belgium and ...
Recent developments in joining of aluminum alloys
(Springer, 2017)
The mass saving potential of light-weight materials, such as Al alloys, is beneficial for fuel economy and reducing CO2 emissions. However, the wide-spread use of these alloys has been long hindered due to the difficulty ...