Ara
Toplam kayıt 6, listelenen: 1-6
Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
(Korean Institute of Metals and Materials, 2019)
Abstract: In this study, the surface of AISI H13 steel was borided with powder blends of B4C and NaBF4 using the powder-pack method at 800, 900 and 1000 °C for 2, 4 and 6 h. The structural and mechanical characteristics ...
Properties and High Temperature Dry Sliding Wear Behavior of Boronized Inconel 718
(Springer, 2020)
Silicide-free boride layers were grown on Inconel 718 Ni-based superalloy surface at 850 degrees C, 950 degrees C, and 1050 degrees C for 2, 4, 6 hour by the powder pack-boronizing process using nano-sized B4C powders. The ...
Mechanical Properties and Corrosion Resistance of Borosintered Distaloy Steels
(Springer, 2020)
Distaloy SA is a sponge iron powder (nominal composition: Fe-1.75Ni-1.5Cu-0.5Mo) widely used in the production of powder metallurgy (P/M) parts in the automotive industry. In this study, Distaloy SA powders were sintered ...
Properties and tribological performance of ceramic-base chromium and vanadium carbide composite coatings
(Elsevier, 2019)
In the current study, the surface of AISI D2 steel was coated with the powder blends of ferro-vanadium (Fe-V) and ferro-chromium (Fe-Cr). The coatings were performed using a thermo-reactive diffusion (TRD) treatment by the ...
Properties and High-Temperature Wear Behavior of Remelted NiCrBSi Coatings
(Springer, 2020)
Remelted NiCrBSi coatings were examined using optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, x-ray diffraction analysis, microhardness and wear testing. After wear tests, the surfaces of ...
Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy
(Elsevier, 2021)
CoCrFeNiAl0.25Ti0.5 high entropy alloy alloys (HEA), produced by powder metallurgy were subjected to boriding to improve their mechanical properties. Sintering was carried out at 1200 degrees C for 2 h in Ar, and boriding ...