Ara
Toplam kayıt 50, listelenen: 1-10
Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level
(Elsevier, 2016)
This article reports a study on the microstructural and mechanical properties of the Alkali Activated Slag mortars (MS) upon exposing to the elevated temperatures up to 800 degrees C. Slag cement is activated by sodium ...
Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
(Institute of Physics Publishing, 2019)
Although friction stir welding (FSW) has widely been applied to aluminum alloys in several industries over the past three decades, it is not yet used in industry for joining of steels. The aim of this study is to characterize ...
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier, 2018)
Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ...
Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
(Korean Institute of Metals and Materials, 2019)
Abstract: In this study, the surface of AISI H13 steel was borided with powder blends of B4C and NaBF4 using the powder-pack method at 800, 900 and 1000 °C for 2, 4 and 6 h. The structural and mechanical characteristics ...
Recent developments in joining of aluminum alloys
(Springer, 2017)
The mass saving potential of light-weight materials, such as Al alloys, is beneficial for fuel economy and reducing CO2 emissions. However, the wide-spread use of these alloys has been long hindered due to the difficulty ...
Wear Behavior of Borided AISI D2 Steel under Linear Reciprocating Sliding Conditions
(Pleiades Publishing, 2019)
AISI D2 steel is the most commonly used cold-work tool steel in its grade. In this study, microstructural characterization and some mechanical properties of borided AISI D2 steel samples were investigated. The boriding ...
Properties and High Temperature Dry Sliding Wear Behavior of Boronized Inconel 718
(Springer, 2020)
Silicide-free boride layers were grown on Inconel 718 Ni-based superalloy surface at 850 degrees C, 950 degrees C, and 1050 degrees C for 2, 4, 6 hour by the powder pack-boronizing process using nano-sized B4C powders. The ...
Microstructure and mechanical properties of borided inconel 625 superalloy
(Universidade Federal do Rio de Janeiro, 2017)
The Ni-based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, ...
CO2-induced mechanical behaviour of Hawkesbury sandstone in the Gosford basin: An experimental study
(Elsevier, 2015)
Carbon dioxide (CO2) sequestered in saline aquifers undergoes a variety of chemically-coupled mechanical effects, which may cause CO2-induced mechanical changes and time-dependent reservoir deformation. This paper investigates ...
Mechanical Properties and Corrosion Resistance of Borosintered Distaloy Steels
(Springer, 2020)
Distaloy SA is a sponge iron powder (nominal composition: Fe-1.75Ni-1.5Cu-0.5Mo) widely used in the production of powder metallurgy (P/M) parts in the automotive industry. In this study, Distaloy SA powders were sintered ...